My Account

Hayabusa Parts EU


“TANK CURE” tank sealant is based on a 2 component epoxy resin. After adding the two components together stir them thoroughly for a couple of minutes, empty the can in your petrol tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible.

Treatment of the tank before application of Tank Sealant
In order to guarantee a good result you always have to do some preparation on your tank Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. “TANK CURE” offers you products that will assist you in the preparation of the tank.

  • “TANK CURE” Tank Cleaner
  • “TANK CURE” Rust Remover
  • “TANK CURE” Epoxy Remover

These products form an ideal base before you apply our tank sealant. We will briefly highlight each product:

“TANK CURE” products enable you to recondition the inside of your fueltank in a professional way. “TANK CURE” is manufactured by POLY-SERVICE. This petrol resistant Tank Sealant is adopted on a large scale in The Netherlands, Germany, England and Belgium. Users have build up more then 15 years of very satisfying experience with this sealant. It has been successfully applied to steel tanks.




There are no reviews yet.

Be the first to review “Tank Epoxy Sealant 600 Gram (TankCure)”